Subject: Dry-Cleaning 

Revised: April 2025 

Purpose: Dry Cleaning operations require an operational permit to engage in the business of dry cleaning or to change to a more hazardous cleaning solvent used in existing dry-cleaning equipment. Dry cleaning is defined by the approved code as, the process of removing dirt, grease, paints, and other stains from such items as wearing apparel, textiles, fabrics and rugs by use of nonaqueous liquids (solvents). Dry cleaning permits shall be renewed on an annual basis. 

Fees: $300.00 Annually 

Requirements: A Dry-Cleaning permit will be issued once an application has been completed appropriately, all applicable documents have been uploaded, reviewed and approved.  

Applications will be completed electronically, and all required documentation shall be uploaded electronically. There shall be no paper submissions. Permit application shall be completed and submitted through the approved Harris County software program. Once the application is received along with all required documentation, the Fire Code Official will conduct a review. When the permit process is complete, and authorization is given, the applicant will be notified that the permit is issued, and the duration of the permit will be indicated.  

All Dry-Cleaning permit applications will begin with generalized information requirements. This information will pertain to the property information/property owner’s information/application information/project name.  

When applying for a Dry-Cleaning operational permit the applicant shall provide the following information:  

• Site map identifying the location of all on-site fire suppression to include fire pumps, ponds, water supplies, layout of fire lanes, gas meter, and Knox Box if installed, and dust collectors. If renewing a dry-cleaning operational permit and no changes have been made to your facility from previous permit cycle, a written statement claiming no changes have been made can be submitted in lieu of plans; 

• A drawing/ floor plan of building including all entrance and exits, location of primary and secondary exit routes, locations of fire extinguishers, fire protection system panels, risers, and/or other fire protection control systems and/or panels, identifiers for each suite including business name and suite number for each suite and location of all display and kiosks. If renewing a dry-cleaning operational permit and no changes have been made to your facility from previous permit cycle, a written statement claiming no changes have been made can be submitted in lieu of plans; 

• Copy of the emergency plan, compliant with Chapter 4 of the International Fire Code, current adopted edition; 

• Information on types of fire alarm systems installed and last inspection date (provide last inspection report or photo of current inspection tag(s). This shall include all fire alarm systems or other gas detection systems at the facility; 

• Information on installed sprinkler systems and last inspection date (provide last inspection report or photo of current inspection tag(s). This shall include all fire sprinkler systems at the facility; 

• Information on fire extinguishers or any type of alternate (including but not limited to automatic hood suppression, Paint booth systems, clean agent) fire protection system installed and last inspection date (provide last inspection report or photo of current inspection tag(s)); 

• Written documentation showing compliance with Chapter 21 of the current adopted fire code and NFPA 32; 

• An up-to date copy of product information for all dry-cleaning solvents and a listing of quantities on-site; 

• An up-to date copy of maintenance and operating practices to prevent leakage or accumulation of lint; 

• If spotting or pre-treating operations occur, a written statement certifying compliance with Chapter 21 Section 2106 of the current adopted fire code; 

If one or more of the requested documents does not apply to your location, please submit in writing a reason for not submitting. 

Denial: If it is determined that an application fails to meet the requirements as set forth in this standard or the applicant refuses to provide all required documentation, the fire code official shall not issue a permit, but shall return the application to the applicant with explanation for refusal.  

Revocation: The fire code official is authorized to revoke a permit where it is found that there has been false statements or misrepresentation as to the material facts in the application or supporting documentation on which the approval and issuance was based, the permit was issued to a different person or firm than named on the permit, the permittee failed, refused or neglected to comply with orders or notices duly served in accordance with the provisions of this code within the time provided therein, or the permit was issued in error or in violation of an ordinance, regulation or this code.